Yes, it’s one of the recent boards from crowdsupply. I downloaded the bitstream .stp file from https://www.microsemi.com/document-portal/doc_download/1243348-polarfire-fpga-bitstream
Both FlashPro and FlashPro Express don’t let me flash the board anymore.
I’m getting either the below error or vjtag cable/flash not detected not connected error:
Error: Device 1: Found: MPF300XT, Expected: MPF300TS_ES
I checked and my FPGA model on the expansion is indeed MPF300XT.
STAPL file ‘C:\HFU540_EXP_Bitstream_r10101.stp’ has been loaded successfully.
DESIGN : PCIe_ChipLink; CHECKSUM : E706; ALG_VERSION : 1
Scan Chain…
Scan Chain PASSED.
Executing action PROGRAM
EXPORT ISC_ENABLE_RESULT[32] = 00000000
EXPORT CRCERR[1] = 0
Programming FPGA Array and sNVM…
Error: Microsemi FlashPro3/3x/4/5 Programmer has been disconnected. Please check connection.
Finished: Sat Jul 20 09:23:58 2019 (Elapsed time 00:00:00)
Error: Executing action PROGRAM FAILED.
o - o - o - o - o - o
It still doesn’t want to flash after trying many different things…