echo "Successfully uploaded ‘demo_gpio’ to freedom-e300-arty."
Open On-Chip Debugger 0.10.0+dev (2018-07-24-18:30)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 10000 kHz
Info : auto-selecting first available session transport “jtag”. To override use 'transport select ‘.
Info : ftdi: if you experience problems at higher adapter clocks, try the command “ftdi_tdo_sample_edge falling"
Info : clock speed 10000 kHz
Info : JTAG tap: riscv.cpu tap/device found: 0x20000913 (mfg: 0x489 (SiFive, Inc.), part: 0x0000, ver: 0x2)
Warn : JTAG tap: riscv.cpu UNEXPECTED: 0x20000913 (mfg: 0x489 (SiFive, Inc.), part: 0x0000, ver: 0x2)
Error: JTAG tap: riscv.cpu expected 1 of 1: 0x10e31913 (mfg: 0x489 (SiFive, Inc.), part: 0x0e31, ver: 0x1)
Error: Trying to use configured scan chain anyway…
Warn : Bypassing JTAG setup events due to errors
Info : datacount=1 progbufsize=16
Info : Disabling abstract command reads from CSRs.
Info : Disabling abstract command writes to CSRs.
Info : Examined RISC-V core; found 1 harts
Info : hart 0: XLEN=32, misa=0x40001105
Info : Listening on port 3333 for gdb connections
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : accepting ‘gdb’ connection on tcp/3333
Error: Device ID 0x20000913 is not known as FESPI capable
Error: auto_probe failed
Error: Connect failed. Consider setting up a gdb-attach event for the target to prepare target for GDB connect, or use ‘gdb_memory_map disable’.
Error: attempted ‘gdb’ connection rejected
Remote connection closed
"monitor” command not supported by this target.
“monitor” command not supported by this target.
You can’t do that when your target is `exec’
“monitor” command not supported by this target.
“monitor” command not supported by this target.
Successfully uploaded ‘demo_gpio’ to freedom-e300-arty.