E300 on Arty not working

mwachs5 · March 22, 2018, 5:35pm

If you build your own image, you need to specify a program to include in the MCS. You can see more in this thread (though the relevant line number link is now:

github.com

sifive/fpga-shells/blob/0ca9f2bb66a8987b3334e446c27e05c7c2c6bde9/xilinx/Makefile#L10


      
          VIVADO ?= vivado
          VIVADOFLAGS := \
          	-nojournal -mode batch \
          	-source $(fpga_board_script_dir)/board.tcl \
          	-source $(fpga_common_script_dir)/prologue.tcl
          
          # Path to a program in raw binary format to be flashed into the address that the
          # bootrom jumps to.
          # FIXME: This variable should probably be communicated by a higher-level Makefile
          FLASHED_PROGRAM ?=
          
          # Init project
          init = $(FPGA_BUILD_DIR)/.init
          $(init): $(fpga_common_script_dir)/init.tcl
          	mkdir -p $(FPGA_BUILD_DIR) && \
          	cd $(FPGA_BUILD_DIR) && \
          	VSRCS="$(VSRCS)" IPVIVADOTCLS="$(IPVIVADOTCLS)" $(VIVADO) $(VIVADOFLAGS) -source $<
          
          .PHONY: init
          init: $(init)

)

Topic		Replies	Views
A non-working mcs file generated for e300artydevkit Freedom E300	8	4555	May 25, 2017
Help! You bricked my ARTY! Freedom E300	10	2982	December 9, 2016
The E310 and Vivado (in GUI mode) Freedom E300	8	4055	June 7, 2019
Bootrom.v is missing Freedom E300	9	3419	November 10, 2020
1.0.2 Demo MCS Payload Not Working Freedom E300	3	1934	February 27, 2017

E300 on Arty not working

Related Topics