# Segger Embedded Studio Issue

**URL:** <https://forums.sifive.com/t/segger-embedded-studio-issue/3756>\
**Category:** HiFive1 Rev B\
**Created:** [June 11, 2020, 7:17pm UTC](https://forums.sifive.com/t/segger-embedded-studio-issue/3756 "2020-06-11T19:17:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JerryX](https://avatars.discourse-cdn.com/v4/letter/j/9fc348/32.png) [@JerryX](https://forums.sifive.com/u/JerryX)\
**Post date:** [June 11, 2020, 7:17pm UTC](https://forums.sifive.com/t/segger-embedded-studio-issue/3756/1 "2020-06-11T19:17:14Z")

</div>

Anyone here using Segger’s Embedded Studio for RISC-V? I am and it seems to work fine with the HiFive1 and RED-V boards.

One issue I do have is seeing the FE310 peripheral registers (GPIO, PWM, UART, etc.) in Embedded Studio. I have the HiFive1 Rev. B Board Support Package installed, and I have “Target Device” set to “FE310”,

In the debugger, in the Registers Group window I only see CPU registers and registers for “Machine Information Registers”, “Machine Trap Setup”, “Machine Trap Handling”, “Machine Protection and Translation” and “Machine Counters/Timers”. I don’t see any register groups for the peripherals like the UARTS, PWMs, etc.

Anyone know how to display the peripheral registers in Embedded Studio?