# Run-openocd fails

**URL:** <https://forums.sifive.com/t/run-openocd-fails/1444>\
**Category:** Freedom E300\
**Created:** [July 25, 2018, 7:30am UTC](https://forums.sifive.com/t/run-openocd-fails/1444 "2018-07-25T07:30:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![keerthi](https://avatars.discourse-cdn.com/v4/letter/k/b3f665/32.png) [@keerthi](https://forums.sifive.com/u/keerthi)\
**Post date:** [July 25, 2018, 7:30am UTC](https://forums.sifive.com/t/run-openocd-fails/1444/1 "2018-07-25T07:30:29Z")

</div>

hi,  
/freedom-e-sdk$ make run\_openocd BOARD=freedom-e300-arty  
work/build/openocd/prefix/bin/openocd -f bsp/env/freedom-e300-arty/openocd.cfg  
Open On-Chip Debugger 0.10.0+dev (2018-07-24-12:24)  
Licensed under GNU GPL v2  
For bug reports, read  
[http://openocd.org/doc/doxygen/bugs.html](http://openocd.org/doc/doxygen/bugs.html)  
adapter speed: 10000 kHz  
Error: The specified debug interface was not found (ftdi)  
The following debug interfaces are available:  
1: jlink

Makefile:237: recipe for target ‘run\_openocd’ failed  
make: \*\*\* [run\_openocd] Error 1

Help me to resolve this error