Is my hifive1 board crashed?


(Daniel kirubakaran) #1

Hi,
I tried uploading RgbLedfade from arduino examples

I am getting this following error

Sketch uses 3870 bytes (0%) of program storage space. Maximum is 8388608 bytes.
Open On-Chip Debugger 0.10.0+dev-gdd0dd7f64e03-dirty (2018-01-09-17:24)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
debug_level: 0
adapter speed: 10000 kHz
Error: Timed out waiting for debug int to clear.Increase timeout with riscv set_command_timeout_sec.
Error: Debug interrupt didn't clear.
Error: Debug RAM 0x0: 0xfff04493
Error: Debug RAM 0x1: 0x01f4d493
Error: Debug RAM 0x2: 0x40902023
Error: Debug RAM 0x2: 0x40902023

Error: Debug RAM 0x3: 0x01f4d493
Error: Debug RAM 0x4: 0x40902223
Error: Debug RAM 0x5: 0x3f00006f
Error: Debug RAM 0x6: 0x060c1218
Error: Debug RAM 0x7: 0xf5dffff3
Error: Debug RAM 0x8: 0x00000000
Error: Debug RAM 0x9: 0x00000000
Error: Debug RAM 0xa: 0x00000000
Error: Debug RAM 0xb: 0x00000000
Error: Debug RAM 0xc: 0x00000000
Error: Debug RAM 0xd: 0x00000000
Error: Debug RAM 0xe: 0x00000000
Error: Debug RAM 0xf: 0x00000000
Error: Failed to discover xlen; word0=0xfff04493, word1=0x1f4d493, exception=0x60c1218
Error: Debug RAM 0x0: 0xfff04493
Error: Debug RAM 0x1: 0x01f4d493
Error: Debug RAM 0x2: 0x40902023
Error: Debug RAM 0x3: 0x01f4d493
Error: Debug RAM 0x4: 0x40902223
Error: Debug RAM 0x5: 0x3f00006f
Error: Debug RAM 0x6: 0x060c1218
Error: Debug RAM 0x7: 0xf5dffff3
Error: Debug RAM 0x8: 0x00000000
Error: Debug RAM 0x9: 0x00000000
Error: Debug RAM 0xa: 0x00000000
Error: Debug RAM 0xb: 0x00000000
Error: Debug RAM 0xc: 0x00000000
Error: Debug RAM 0xd: 0x00000000
Error: Debug RAM 0xe: 0x00000000
Error: Debug RAM 0xf: 0x00000000
Error: Target not examined yet

(Jim Sughrue) #2

Hi Daniel,

As far as I know there is no software support for HiFive1 or HiFive1 rev B in Arduino IDE.

Please see SiFive’s IDE software named Freedom Studio here: https://www.sifive.com/boards


(Daniel kirubakaran) #3

I could see the error from freedom studio console also,after trying to upload some sample programs like RGB fade or blinking.