# How to upload peograms to Arty 7 and debug by jtag interference?

**URL:** <https://forums.sifive.com/t/how-to-upload-peograms-to-arty-7-and-debug-by-jtag-interference/635>\
**Category:** SiFive RISC-V Core IP Evaluation\
**Created:** [July 10, 2017, 4:44am UTC](https://forums.sifive.com/t/how-to-upload-peograms-to-arty-7-and-debug-by-jtag-interference/635 "2017-07-10T04:44:48Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![dagema](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.sifive.com/dagema/32/59_2.png) [@dagema](https://forums.sifive.com/u/dagema)\
**Post date:** [July 10, 2017, 8:40am UTC](https://forums.sifive.com/t/how-to-upload-peograms-to-arty-7-and-debug-by-jtag-interference/635/4 "2017-07-10T08:40:37Z")

</div>

I think you need to check your wiring between the Olimex debugger and the Arty. Also check out [this](http://forums.sifive.com/t/uploading-to-my-arty-board-not-working/323) thread.

---

_[View the full topic](https://forums.sifive.com/t/how-to-upload-peograms-to-arty-7-and-debug-by-jtag-interference/635)._