# Freedom Studio on Linux

**URL:** <https://forums.sifive.com/t/freedom-studio-on-linux/685>\
**Category:** General\
**Created:** [August 11, 2017, 5:06am UTC](https://forums.sifive.com/t/freedom-studio-on-linux/685 "2017-08-11T05:06:23Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![Cesare.Garlati](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.sifive.com/cesare.garlati/32/465_2.png) [@Cesare.Garlati](https://forums.sifive.com/u/Cesare.Garlati)\
**Post date:** [April 28, 2018, 12:29am UTC](https://forums.sifive.com/t/freedom-studio-on-linux/685/16 "2018-04-28T00:29:45Z")

</div>

It works! Thanks Cesare

Note for future readers of this post: here is a quick recap of mcs, jtag id and board config

> E300ArtyDevKitFPGAChip.mcs  
> [GitHub - sifive/freedom: Source files for SiFive's Freedom platforms](https://github.com/sifive/freedom)  
> JTAG=0x20000913  
> BOARD=freedom-e300-arty  
> (See [Freedom E300 MCS file not working - #5 by mwachs5](http://forums.sifive.com/t/freedom-e300-mcs-file-not-working/710/5))
> 
> freedom-e310-arty-1-0-2.mcs  
> [GitHub - sifive/freedom: Source files for SiFive's Freedom platforms](https://github.com/sifive/freedom)  
> JTAG=0x10e31913  
> BOARD=freedom-e300-arty
> 
> sifive\_coreip\_E31\_FPGA\_Evaluation\_v2p0\_0.mcs  
> [https://dev.sifive.com/dashboard/deliverables/sifive\_e31\_fpga\_eval\_kit\_bitstream/releases/v2p0/download](https://dev.sifive.com/dashboard/deliverables/sifive_e31_fpga_eval_kit_bitstream/releases/v2p0/download)  
> JTAG=0x20000001  
> BOARD=coreplexip-e31-arty

---

_[View the full topic](https://forums.sifive.com/t/freedom-studio-on-linux/685)._