# Error using make -f Makefile.e300artydevkit mcs **URL:** \ **Category:** Freedom E300\ **Created:** [January 4, 2020, 4:42pm UTC](https://forums.sifive.com/t/error-using-make-f-makefile-e300artydevkit-mcs/3205 "2020-01-04T16:42:47Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![dkhayes117](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.sifive.com/dkhayes117/32/773_2.png) [@dkhayes117](https://forums.sifive.com/u/dkhayes117)\ **Post date:** [January 4, 2020, 4:42pm UTC](https://forums.sifive.com/t/error-using-make-f-makefile-e300artydevkit-mcs/3205/1 "2020-01-04T16:42:47Z")
Not sure where to go from here ```auto dkhayes117@dkhayes117-Alienware-13-R2:~/freedom$ make -f Makefile.e300artydevkit mcs make -C /home/dkhayes117/freedom/bootrom/xip romgen make[1]: Entering directory '/home/dkhayes117/freedom/bootrom/xip' /bin/riscv64-unknown-elf-gcc -march=rv32imac -mabi=ilp32 -O2 -std=gnu11 -Wall -I. -nostartfiles -fno-common -g -DXIP_TARGET_ADDR=0x20400000 -DDEVICE_TREE='"/home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.dtb"' -static -nostdlib -o /home/dkhayes117/freedom/builds/e300artydevkit/xip.elf xip.S make[1]: /bin/riscv64-unknown-elf-gcc: Command not found Makefile:17: recipe for target '/home/dkhayes117/freedom/builds/e300artydevkit/xip.elf' failed make[1]: *** [/home/dkhayes117/freedom/builds/e300artydevkit/xip.elf] Error 127 make[1]: Leaving directory '/home/dkhayes117/freedom/bootrom/xip' common.mk:68: recipe for target '/home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.rom.v' failed make: *** [/home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.rom.v] Error 2 ``` ---
**Author:** ![dkhayes117](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.sifive.com/dkhayes117/32/773_2.png) [@dkhayes117](https://forums.sifive.com/u/dkhayes117)\ **Post date:** [January 4, 2020, 4:51pm UTC](https://forums.sifive.com/t/error-using-make-f-makefile-e300artydevkit-mcs/3205/2 "2020-01-04T16:51:04Z")
I think i had the RISCV environment variable wrong, changed it and now get this error, and it seems to get further than before ```auto dkhayes117@dkhayes117-Alienware-13-R2:~/freedom$ make -f Makefile.e300artydevkit mcs make -C /home/dkhayes117/freedom/bootrom/xip romgen make[1]: Entering directory '/home/dkhayes117/freedom/bootrom/xip' /home/dkhayes117/riscv//bin/riscv64-unknown-elf-gcc -march=rv32imac -mabi=ilp32 -O2 -std=gnu11 -Wall -I. -nostartfiles -fno-common -g -DXIP_TARGET_ADDR=0x20400000 -DDEVICE_TREE='"/home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.dtb"' -static -nostdlib -o /home/dkhayes117/freedom/builds/e300artydevkit/xip.elf xip.S /home/dkhayes117/riscv//bin/riscv64-unknown-elf-objcopy -O binary /home/dkhayes117/freedom/builds/e300artydevkit/xip.elf /home/dkhayes117/freedom/builds/e300artydevkit/xip.bin od -t x4 -An -w4 -v /home/dkhayes117/freedom/builds/e300artydevkit/xip.bin > /home/dkhayes117/freedom/builds/e300artydevkit/xip.hex /home/dkhayes117/freedom/rocket-chip/scripts/vlsi_rom_gen /home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.rom.conf /home/dkhayes117/freedom/builds/e300artydevkit/xip.hex > /home/dkhayes117/freedom/builds/e300artydevkit/rom.v make[1]: Leaving directory '/home/dkhayes117/freedom/bootrom/xip' mv /home/dkhayes117/freedom/builds/e300artydevkit/rom.v /home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.rom.v echo /home/dkhayes117/freedom/rocket-chip/src/main/resources/vsrc/AsyncResetReg.v /home/dkhayes117/freedom/rocket-chip/src/main/resources/vsrc/plusarg_reader.v /home/dkhayes117/freedom/sifive-blocks/vsrc/SRLatch.v /home/dkhayes117/freedom/fpga-shells/xilinx/common/vsrc/PowerOnResetFPGAOnly.v /home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.rom.v /home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.v > /home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.vsrcs.F cd /home/dkhayes117/freedom/builds/e300artydevkit; vivado \ -nojournal -mode batch \ -source /home/dkhayes117/freedom/fpga-shells/xilinx/common/tcl/vivado.tcl \ -tclargs \ -top-module "E300ArtyDevKitFPGAChip" \ -F "/home/dkhayes117/freedom/builds/e300artydevkit/sifive.freedom.everywhere.e300artydevkit.E300ArtyDevKitConfig.vsrcs.F" \ -ip-vivado-tcls "" \ -board "arty" /bin/sh: 1: vivado: not found common.mk:81: recipe for target '/home/dkhayes117/freedom/builds/e300artydevkit/obj/E300ArtyDevKitFPGAChip.bit' failed make: *** [/home/dkhayes117/freedom/builds/e300artydevkit/obj/E300ArtyDevKitFPGAChip.bit] Error 127 ``` ---
**Author:** ![dkhayes117](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.sifive.com/dkhayes117/32/773_2.png) [@dkhayes117](https://forums.sifive.com/u/dkhayes117)\ **Post date:** [January 5, 2020, 7:40pm UTC](https://forums.sifive.com/t/error-using-make-f-makefile-e300artydevkit-mcs/3205/3 "2020-01-05T19:40:31Z")
Finally got the make file to work. I was using Vivado Lab which didn’t want to work. I downloaded Vivado HLx Webpack and it worked. Now I’m having trouble getting the board to show up in the hardware manager in Vivado. Any tricks for getting the board to show up via usb? ---
**Author:** ![dkhayes117](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.sifive.com/dkhayes117/32/773_2.png) [@dkhayes117](https://forums.sifive.com/u/dkhayes117)\ **Post date:** [January 5, 2020, 9:01pm UTC](https://forums.sifive.com/t/error-using-make-f-makefile-e300artydevkit-mcs/3205/4 "2020-01-05T21:01:02Z")
Found this link [https://www.xilinx.com/support/answers/54381.html?\_ga=2.100043422.1680808084.1578187830-1613548186.1578187830](https://www.xilinx.com/support/answers/54381.html?_ga=2.100043422.1680808084.1578187830-1613548186.1578187830) that shows how to do a clean re-install of the cable drivers, this fixed the problem ---
**Author:** ![Srividhya\_6](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@Srividhya\_6](https://forums.sifive.com/u/Srividhya_6)\ **Post date:** [July 25, 2020, 1:57pm UTC](https://forums.sifive.com/t/error-using-make-f-makefile-e300artydevkit-mcs/3205/5 "2020-07-25T13:57:43Z")
i am getting the same error. can you please tell me the solution for it. ---
**Author:** ![Srividhya\_6](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@Srividhya\_6](https://forums.sifive.com/u/Srividhya_6)\ **Post date:** [July 25, 2020, 1:58pm UTC](https://forums.sifive.com/t/error-using-make-f-makefile-e300artydevkit-mcs/3205/6 "2020-07-25T13:58:54Z")
i am getting this error