# Do you want to try running Forth code on your HiFive1?

**URL:** <https://forums.sifive.com/t/do-you-want-to-try-running-forth-code-on-your-hifive1/479>\
**Category:** HiFive1 Rev B\
**Created:** [April 12, 2017, 1:38am UTC](https://forums.sifive.com/t/do-you-want-to-try-running-forth-code-on-your-hifive1/479 "2017-04-12T01:38:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nimblemachines](https://avatars.discourse-cdn.com/v4/letter/n/e95f7d/32.png) [@nimblemachines](https://forums.sifive.com/u/nimblemachines)\
**Post date:** [April 12, 2017, 1:38am UTC](https://forums.sifive.com/t/do-you-want-to-try-running-forth-code-on-your-hifive1/479/1 "2017-04-12T01:38:57Z")

</div>

Since I received my HiFive1 on March 20, I’ve been working hard to add support for RISC-V and the HiFive1 to my Forth target compiler system, [muforth](https://github.com/nimblemachines/muforth).

There are pieces missing still, but today it’s possible to connect via `openocd`, dump memory, disassemble code, and write and run bits of assembler and Forth code, all interactively, using only muforth. No need for GCC, binutils, or GDB!

If you want to try it out, I’ve written up instructions for [getting starting with RISC-V](http://muforth.nimblemachines.com/getting-started-with-risc-v/) and muforth.

Enjoy!