# Code upload fails **URL:** \ **Category:** HiFive1 Rev B\ **Created:** [May 23, 2021, 2:24am UTC](https://forums.sifive.com/t/code-upload-fails/4707 "2021-05-23T02:24:59Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![bsvtgc](https://avatars.discourse-cdn.com/v4/letter/b/ce7236/32.png) [@bsvtgc](https://forums.sifive.com/u/bsvtgc)\ **Post date:** [May 23, 2021, 2:24am UTC](https://forums.sifive.com/t/code-upload-fails/4707/1 "2021-05-23T02:24:59Z")
I am trying to build and upload hello application using freedom-esdk on Hifive1 Rev B board. #1 Build: make [PROGRAM=hello] [TARGET=sifive-hifive1-revb] [CONFIGURATION=debug] software This has build the binary successfully iscv64-unknown-elf-size /home/rust5/GitHubDir/freedom-sdk/software/hello/debug/hello.elf text data bss dec hex filename 21314 1924 3236 26474 676a /home/rust5/GitHubDir/freedom-sdk/software/hello/debug/hello.elf #2 upload to target using following command: make [PROGRAM=hello] [TARGET=sifive-hifive1-revb] [CONFIGURATION=debug] upload This throws the following error: scripts/upload --elf /home/rust5/GitHubDir/freedom-sdk/software/hello/debug/hello.elf --openocd openocd --gdb riscv64-unknown-elf-gdb --openocd-config bsp/freedom-e310-arty/openocd.cfg Open On-Chip Debugger 0.11.0-rc1+dev (SiFive OpenOCD 0.10.0-2020.12.1) Licensed under GNU GPL v2 For bug reports: [Issues · sifive/freedom-tools · GitHub](https://github.com/sifive/freedom-tools/issues) **DEPRECATED! use ‘adapter speed’ not 'adapter\_khz’** Using JTAG Info : auto-selecting first available session transport “jtag”. To override use 'transport select '. Error: no device found Error: unable to open ftdi device with vid 15ba, pid 002a, description ‘Olimex OpenOCD JTAG ARM-USB-TINY-H’, serial ‘_’ at bus location '_’ **It seems the openocd script/command is outdated. Any help to address is greatly appreciated.**