# Arduino IDE on Ubuntu can't upload program

**URL:** <https://forums.sifive.com/t/arduino-ide-on-ubuntu-cant-upload-program/1460>\
**Category:** HiFive1 Rev B\
**Created:** [July 28, 2018, 2:07pm UTC](https://forums.sifive.com/t/arduino-ide-on-ubuntu-cant-upload-program/1460 "2018-07-28T14:07:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![algx](https://avatars.discourse-cdn.com/v4/letter/a/ccd318/32.png) [@algx](https://forums.sifive.com/u/algx)\
**Post date:** [July 28, 2018, 2:07pm UTC](https://forums.sifive.com/t/arduino-ide-on-ubuntu-cant-upload-program/1460/1 "2018-07-28T14:07:29Z")

</div>

Arduino: 1.8.6 Hourly Build 2018/07/20 10:25 (Linux), Board: “HiFive 1, Default, 16 MHz XTAL”

Sketch uses 6928 bytes (0%) of program storage space. Maximum is 8388608 bytes.  
Open On-Chip Debugger 0.10.0-dev-g9bab078 (2017-02-02-01:39)  
Licensed under GNU GPL v2  
For bug reports, read  
[http://openocd.org/doc/doxygen/bugs.html](http://openocd.org/doc/doxygen/bugs.html)  
adapter speed: 10000 kHz  
Info : auto-selecting first available session transport “jtag”. To override use 'transport select '.  
Error: libusb\_open() failed with LIBUSB\_ERROR\_ACCESS  
Error: no device found  
Error: unable to open ftdi device with vid 0403, pid 6010, description ‘Dual RS232-HS’, serial ‘_’ at bus location '_’

the selected serial port  
does not exist or your board is not connected

---

<div class="post-metadata">

**Author:** ![algx](https://avatars.discourse-cdn.com/v4/letter/a/ccd318/32.png) [@algx](https://forums.sifive.com/u/algx)\
**Post date:** [August 3, 2018, 2:39am UTC](https://forums.sifive.com/t/arduino-ide-on-ubuntu-cant-upload-program/1460/2 "2018-08-03T02:39:07Z")

</div>

Finally found the problem. Just used other USB port and it solved the problem.
