HiFive1


About the HiFive1 category (1)
PPM stops working after UART setup ( 2 ) (21)
Parameters increase benchmarking time (3)
Maximum current draw per pin (1)
OTP wipes backup1 on reset? (6)
Writing assembly for HiFive1 (9)
Flush instruction cache (2)
Link error of DHRYSTONE (3)
How to properly get the timer interrupt to work? (1)
Brand new user, having issues getting started (1)
HiFive1 setup issue (2)
"error during erase" on HiFive1 revb (2)
Will there eventually be PlatformIO support for the revb? (4)
HiFive1 RevB Now supported on platformio? (2)
HiFive1 Rev B Debugger doesn't work in platformio (2)
How to clear interrupt in interrupt handler? (3)
Does the debugger work? (8)
Questions about I2C... Mainly, how do I use it? (14)
Beginner trying to set up timer IRQ in assembler: how to print CSRs in GDB? ( 2 ) (24)
Clock generation and configuration (1)
Able to build demo hello program but can't RUN (2)
What is the use of mip csr while mcause gives complete picture? (1)
Can't access CSRs on HiFive1 rev B from Freedom Studio (via J-Link OB) (5)
Quad SPI mode on Hifive1 (1)
GPIO pins set to HIGH while reseting (1)
Running AES library on Hifive1 (5)
ATE0--> Send Flag error: #0 #0 #0 #0 AT+BLEINIT=0-->AT+BLEINIT=0 (2)
Build Demo application RISC-V-Qemu-sifive_e-FreedomStudio FreeRTOS v10.2.1 (1)
HiFive1 Rev B lsusb NOT detected (2)
SPI Hifive 1 Rev B (7)